-
RSTX200
RSTX200
SPECIAL ENCODER - metric wheelElectronic metric wheel of 200 mm for turn, length measurement (road, pipe, cable, bars etc). Various wheel set-up according to applications.
Metric wheel (mm) 200
Mechanical assembly completely assembled with encoder, and the metric wheel support arm
Metric wheel aluminium smooth, aluminium knurled, aluminium tired, plastic tired
Resolution (PPR) max 10.000
Interface LD,LD2,PP2,NPN,PNP
-
TinyBoost (v1.0)
SPECIALSmall battery charger/power bank board with 3.7V 10000 mAh single cell LiPo battery to ensure many hour of battery functioning of your RaspberryPi, Arduino, ecc... Suitable for Domotic, Industrial application, home applications, maker and more.
A small battery charger/power bank, board 24 mm x 55 mm, 4 layers PCB. Able to ensure many hours of operation by a single cell 3.7V / 10000mAh LiPo battery. Tested with RPi3 / RPi3B + also suitable for RPi4. Requires 5V@3A min. power supply to charger the battery. The board permit to use a pushbutton switch to power on and off the load in a controlled way. The battery charging should be performed with the system powered off.
-
MyIoT RPICM3
Automation & DomoticMyIoT-RPICM3 is a device based on the "Compute Module 3", able to make Rasperry Pi suitable for use in professional environments. The device is built around the "Compute Module 3" module, the "professional" version of Raspberry Pi and is composed of a series of "bases" that allow you to expose the main peripherals available on the CM3, and not only.
Dimensions: Compact 2 modules DIN rail mounting enclosures
-
Main fields of application: motor feedback, general industrial automation.
Absolute single-turn analogue encoder TSTMW42 for motorfeedback has been developed upon specific customer's requirements.
The encoder output is a pair of SIN-COS signals developed on a single mechanical turn (is also provided a continuous reference signal REF) and can be also supplied with incremental output interface.
-
Protection module MPR01
SPECIAL - protection moduleProtection module for three channel incremental encoder. The power supply line and the signals line are protected against supply voltage transient and induced noise by means of a passive system, composed by thermal resistor and Transient Voltage Suppressor (fast acting voltage suppressor).
Dimensions (mm): 90,5x79x25
-
TGR38
TGR38
SPECIAL ENCODER electronics handwheelHandwheel electronic incremental encoder for various industrial applications
Body diameter (mm) 38
Diameter handwheel (mm) 60
Resolution (PPR) 25, 100
Interface LD, LD2, PP2, NPN, PNP, S
-
RM200
RM200
SPECIAL ENCODER - metric wheelElectronic metric wheel of 200 mm for turn, length measurement (road, pipe, cable, bars etc). Various wheel set-up according to applications.
Metric wheel (mm) 200
Mechanical assembly completely assembled with encoder, and the metric wheel support arm
Metric wheel aluminium smooth, aluminium knurled, aluminium tired, plastic tired
Resolution (PPR) max 3600
Interface LD,LD2,PP2,NPN,PNP
-
RS500
RS500
SPECIAL ENCODER - metric wheelElectronic metric wheel of 500 mm for turn, length measurement (road, pipe, cable, bars etc).
Various wheel set-up according to applications.Metric wheel (mm) 500
Mechanical assembly completely assembled with encoder, and the metric wheel support arm
Metric wheel aluminium smooth, aluminium knurled, aluminium tired, plastic tired
Resolution (PPR) max 5000
Interface LD,LD2,PP2,NPN,PNP
-
TK250-TK260
TK250 - TK260
SPECIAL ENCODER - bicoderBicoder for generic industrial applications, available with incremental-incremental or incremental-absolute sections.
For incremental section refers to TK50, TK60H models,
for absolute section refers to the TKC50 and TKC60H models.Body diameter (mm) 63,5
Diameter shaft (mm) 6, 10
-
TDT50
TDT510 - TDT511 - TDT560 - TDT561
SPECIAL ENCODER - encoder + tachogeneratorHeavy duty encoder with integrated tachogenerator
Body diameter flangia square (mm) 63,5
Diameter shaft (mm) 9.52, 10
Resolution (PPR) max 9000
Output voltage 20V/1000RPM
Interface LD, LD2, PP2, NPN, PNP, S
-
TDT100
TDT110 - TDT111 - TDT120 - TDT121
SPECIAL ENCODER - encoder + tachogeneratorHeavy duty encoder with integrated tachogenerator
Body diameter (mm) 115
Diameter shaft (mm) 11
Resolution (PPR) max 10000
Output voltage 60V/1000RPM
Interface LD, LD2, PP2, NPN, PNP, S
-
TKM73
TKM7310 - TKM7311 - TKM7320 - TKM7321
SPECIAL ENCODER- encoder with integrated coupling for servo motorsHeavy duty incremental encoder with integrated coupling and mounting bell for generic industrial applications.
Body diameter 72
Diameter shaft (mm) 6, 8, 9.52, 10
Resolution (PPR) max 3600, other resolution on demand
Interface LD, LD2, PP2, OC, OP, NPN, PNP, S
-
TKM38
TKM310 - TKM311 - TKM320 - TKM321
SPECIAL ENCODER- encoder with integrated coupling for servo motorsLow-cost incremental encoder with integrated coupling and mounting bell for generic industrial applications.
Body diameter (mm) 74
Flange type A 74, Flange type b 46, Flange type C 48
Diameter shaft (mm) 6, 8, 10
Resolution (PPR) max 3600
Interface LD, LD2, PP2, OC, OP, NPN, PNP, S
-
TRC100
TRC110 - TRC111 - TRC120 - TRC121
SPECIAL ENCODER - encoder + centrifugal relayEncoder with centrifugal relay for monitoring speed of axis and ensuring safety for industrial applications.
Body diameter (mm) 115 (fixable flange)
Diameter shaft (mm) 11
Pulse rate (PPR) max 10000
Setting speed 780÷6000 RPM
Interface LD, LD2, PP2, NPN, PNP
-
TKW615REO
TKW6151REO444 - TKW6152REO444 - TKW6161REO444 - TKW6162REO444
SPECIAL ENCODER - encoder + tachogeneratorHeavy duty encoder with integrated tachogenerator
Body diameter (mm) 115
Diameter shaft (mm) 11
Resolution (PPR) max 3600 (on demand up to 5000)
Output voltage 60V/1000RPM
Interface LD, LD2, PP2, NPN, PNP, S, OC, P, OP