MyIoT RPICM3
MyIoT-RPICM3 is a device based on the “Compute Module 3″, able to make Rasperry Pi suitable for use in professional environments. The device is built around the “Compute Module 3″ module, the “professional” version of Raspberry Pi and is composed of a series of “bases” that allow you to expose the main peripherals available on the CM3, and not only. All inserted in a DIN bar compatible container with two modules. It has an Ethernet LAN 10/100 port compliant with...
Protection module MPR01
Protection module for three channel incremental encoder. The power supply line and the signals line are protected against supply voltage transient and induced noise by means of a passive system, composed by thermal resistor and Transient Voltage Suppressor (fast acting voltage suppressor). Dimensions (mm): 90,5x79x25 Potection degree: IP20 (EN 60529)
PROGRAMMABLE TISP58 (from 1 up to 65536 ppr)
TISP581 Programmable incremental optical encoder user-programmable from 1 up to 65536 PPR New: available also with a cable output and aluminum housing. Counting direction: can be set by user Zero pulse: the position can be defined by the user through a pushbutton on the encoder housing Output voltage: selectable by user Encoder programming: by means of the classical RS232 serial port or simple USB to RS232 adapter (no need for custom expensive adapters) Device diagnostics through signaling led on the...
NEW PROGRAMMABLE ENCODER TISP58/TISPW58
NEW INCREMENTAL PROGRAMMABLE ENCODER TISP58//TISPW58 FROM 1 TO 65536 PPR! MAIN FEATURES: - Incremental resolution: user-programmable from 1 up to 65536 PPR - Counting direction: can be set by user - Zero pulse: the position can be defined by the user through a pushbutton on the encoder housing - Output voltage: selectable by user - Encoder programming: by means of the classical RS232 serial port or simple USB to RS232 adapter (no need for custom expensive adapters) - Available with...
TS52
TS520 – TS521 Optical incremental encoder – Solid shaft Compact encoder for general industrial applications. Particularly suitable for lifts and elevators. Body diameter (mm) 52 Flange square flange Diameter shaft (mm) 9.52 Resolution (PPR) 500, 1000, 2000 (other values on demand) Interface LD, LD2 MECHANICAL SPECIFICATIONS Dimensions see drawings Shaft AISI stainless steel Shaft loading axial 40N; radial 40N Shaft Rotation Speed 10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM whith protection shaft Starting torque a 25°...
TI70
TI70 Rugged optical incremental encoder for heavy duty application. The model TI70 is developed and manufactured according to ATEX rules - ATEX EEx d IIB T6 (CEI EN 60079-0/60079-1 UI1203 C22.2), but it is supplied without ATEX certification. The body and enclosures are passivated by means of anodic oxidation.
Italsensor Encoders. Compatibility, production and delivery in 48 hours. All made in Italy
Since 1976, Italsensor produce any type of encoder. With the experience gained from the Tekel Instruments and collaboration with the Department of Robotics of the Polytechnic of Turin, is quickly becoming one of the leading companies and point of reference in the field of industrial automation. Through a well-established and extensive experience in electronic Italsensor is specialized in the production of: - Encoder customized according to customer requirements - Entries and electronic systems of information and requests provided by the...
Electronic cams programmer
Electronic cams programmer This electronic instrument allows to configure up to 8 programs, each one comprehensive of 16 electronics cams, retained into the instrument not volatile memory, every cam is freely configurable in order to open or close the related output contacts. For setting the cams and the relative measurement is used a TKE series single turn absolute encoder that can be supplied separately by the programmer. TECHNICAL CHARACTERISTICS - Panel installation or bar DIN connection (mechanical size listed into...