TKM38
TKM310 – TKM311 – TKM320 – TKM321
Low-cost incremental encoder with integrated coupling and mounting bell for generic industrial applications.
Body diameter (mm) 74
Flange type A 74, Flange type b 46, Flange type C 48
Diameter shaft (mm) 6, 8, 10
Resolution (PPR) max 3600
Interface LD, LD2, PP2, OC, OP, NPN, PNP, S
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shaft loading |
axial 40N; radial 40N |
| Shaft Rotation Speed |
12.000 RPM continuous; 6000 RPM continuous; 2000 RPM whit hole shaft proof |
| Starting torque a 25° C |
0,025 Nm |
| Moment of inertia |
40g cm² |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Weight |
~ 0,7 kg |
ELECTRICAL SPECIFICATIONS
| Output frequency |
up to 150 kHz |
| Sinchronous index output |
default on channel A; B – A+B on demand |
| Supply current without load |
150 mA max |
| Protection |
short circuit protection (only LD2 e PP2) against inversion of polarity (except 5Vcc) |
MATERIALS
| Flange |
aluminium S11 |
| Housing |
Polyamid 6 (PA6) |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +70°C |
| Storage temperature range |
-30°C ÷ +80°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10 g (from 10 up to 2.000 Hz) |
| Schock |
20 g (for 11 ms) |
ORDERING CODE
TKMXXXXXXXXXXXXXXK1XXPLnnXXX-XXXXXnnn
TYPE
| TKM310 |
unidirectional |
| TKM311 |
unidirect + index |
| TKM320 |
bidirectional |
| TKM321 |
bidirect + index |
ASSEMBLY
| A |
Flange a lanterna tipo "A" |
| B |
Flange a lanterna tipo "B" |
| C |
Flange a lanterna tipo "C" |
PULSE RATE
2 - 3 - 5 - 10 - 15 - 20 - 25 - 32 - 36 - 40 - 50 - 60 - 64 - 72 -
78 - 100 - 108 - 125 - 128 - 132 - 150 - 156 - 168 - 176 -
180 - 188 - 192 - 200 - 216 - 239 - 250 - 254 - 256 - 300 -
314 - 360 - 400 - 500 - 512 - 600 - 625 - 720 - 800 - 900 -
1000 - 1024 - 1250 - 1440 - 2000 - 2500 - 3600
VOLTAGE SUPPLY
| 5 |
+5V ±5% |
| 11/30 |
+11V ÷ 30V |
| 24/5 |
+11/30V +5V output |
OUTPUT FREQUENCY
| S |
from 0 up to 50 kHz |
| V |
from 0 up to 150 kHz |
HOLLOW SHAFT
| 6 |
Ø 6mm |
| 8 |
Ø 8mm |
| 10 |
Ø 10mm |
ELECTRICAL CONNECTIONS
| OUTPUT |
S; P; OC; OP; PP2; LD; LD2 |
| PLnn |
radial cable gland with cable 1 up to 6m long |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
OUTPUT CIRCUITS
| S |
NPN standard (resistor included) |
| OC |
NPN open collector |
| P |
PNP (resistor included) |
| OP |
PNP open collector |
| PP2-5 |
Push-Pull 5 V output |
| PP2-1130 |
Push-Pull 11/30 V output (only with voltage supply 11/30 V) |
| LD |
Line driver RS422 (26LS31) only 5V or 24/5V |
| LD2-5 |
Line driver 5 Vcc output |
| LD2-1130 |
Line driver 11÷30 Vcc output (only with voltage supply 11/30 V) |
CUSTOM
