TKE45
TKE45
Optical singleturn absolute encoder – Solid shaft
Low-cost encoder for general industrial applications.
Body diameter (mm) 63,5
Diameter shaft (mm) 10
Resolution (PPR) max 1000. Resolution up to 13 bit on demand.
Available codes G, G/0, G/19, G/38, G/76, B, B/0, B/19, B/38, B/76, D, E
Interface OC,OP,NPN,PNP, S13D
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shaft |
stainless steel |
| Shaft loading |
axial 200N; radial 200N |
| Shaft Rotation Speed |
10.000 RPM to short cycle time; 6000 RPM continuous |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Weight |
~ 0,5 kg |
ELECTRICAL SPECIFICATIONS
| STD code |
GRAY – BINARY – BCD |
| Output frequency |
da 0 a 20 kHz (L.S.B. without error) |
| Protection |
against inversion of polarity (except 5Vcc) |
MATERIALS
| Flange |
aluminium non corroding |
| Housing |
aluminium painted with inhbithing treatment 180°C |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +70°C |
| Storage temperature range |
-30°C ÷ +80°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10 g (from 10 up to 2.000 Hz) |
| Schock |
20 g (for 11 ms) |
ORDERING CODE
TKE45XXXXXXXXXXXXXXXXXX10XXnnXXXXXXnnn
ASSEMBLY
| F |
Square Flange |
| H |
Flange Servo |
| SG |
Servo-Clip |
STEPS
| 16 |
16 steps/turn G;B |
| 32 |
32 steps/turn G;B |
| 64 |
64 steps/turn G;B |
| 128 |
128 steps/turn G;B |
| 256 |
256 steps/turn G;B |
| 512 |
512 steps/turn G;B |
| 1024 |
1024 steps/turn G;B |
| 250 |
250 steps/turn E;D |
| 360 |
360 steps/turn E;D |
| 500 |
500 steps/turn E;D |
| 720 |
720 steps/turn E;D |
| 1000 |
1000 steps/turn E;D |
| 90 |
90 steps/turn G/0;B/0 |
| 180 |
180 steps/turn G/0;B/0 |
| 360 |
360 steps/turn G/0;B/0 |
| 720 |
720 steps/turn G/0;B/0 |
| 90 |
90 steps/turn G/19;B/19 |
| 180 |
180 steps/turn G/38;B/38 |
| 360 |
360 steps/turn G/76;B/76 |
| 720 |
720steps/turn G/152;B/152 |
| 90 |
90 steps/turn D |
| 180 |
180 steps/turn D |
| 250 |
250 steps/turn G/0;B/0 |
| 500 |
500 steps/turn G/0;B/0 |
| 1000 |
1000 steps/turn G/0;B/0 |
CODE
| B |
binary code natural |
| B/0 |
binary code centrally cutted. |
| B/19 |
binary code /exc (90) |
| B/38 |
binary code /exc (180) |
| B/76 |
binary code /exc (360) |
| B/152 |
binary code /exc (152) |
| D |
BCD code (100÷720) |
| E |
Excess 3 code gray (100÷720) |
| G |
natural gray code |
| G/0 |
centrally cutted gray code |
| G/19 |
gray code/exc (90) |
| G/38 |
gray code/exc (180) |
| G/76 |
gray code/exc (360) |
| G/152 |
gray code/exc (152) |
VOLTAGE SUPPLY
| 5 |
+5V ±5% |
| 11/30 |
+11V +30V |
PROTECTION CLASS
| K1 |
IP 55 (EN60529) only with D25 |
| K4 |
IP 64 (EN60529) |
ELECTRICAL CONNECTIONS
| Pnn |
on axial cable gland with cable from 1 up to 6m long |
| PLnn |
radial cable gland with cable 1 up to 6m long |
| S07 |
on 7 pins axial MIL connector |
| S10 |
on 10 pins axial MIL connector |
| S26 |
on 26 pins axial MIL connector |
| D25 |
on 25 pins axial DB25 connector |
| SL07 |
on 7 pins radial MIL connector |
| SL10 |
on 10 pins radial MIL connector |
| SL26 |
on 26 pins radial MIL connector |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
OUTPUT CIRCUITS
| 20 |
PNP open collector positive logic |
| 21 |
PNP resistor included positive logic (only 11/30) |
| 22 |
NPN open collector negative logic |
| 23 |
NPN resistor of pull-up negative logic (only 11/30) |
| S13D |
SSI 13bit right allignement (only 11/30) |
OPTIONS
| U |
Up/Down NPN |
| Z |
Zero signal (except output S13D) |
| V |
Displayed zero (except output S13D) |
CUSTOM
