TKTC
TKTC
Optical singleturn absolute encoder – Solid shaft
Miniature encoder for general industrial applications.
Body diameter (mm) 50
Diameter shaft (mm) 6 with type a (without milling) and type b with milling
Resolution (PPR) max 360. Resolution up to 13 bit on demand
Available codes G, G/0, G/19, G/38, G/76, B, B/0, B/19, B/38, B/76
Interface OC, OP, NPN, PNP
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shaft |
stainless steel |
| Shaft loading |
axial 5N; radial 5N |
| Shaft Rotation Speed |
10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM whit hole shaft proof |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Weight |
~ 0,3 kg |
ELECTRICAL SPECIFICATIONS
| Code |
GRAY – BINARY |
| Output frequency |
da 0 a 20 kHz (L.S.B. without error) |
| Protection |
against inversion of polarity (except 5Vcc) |
MATERIALS
| Flange |
aluminium S11 |
| Housing |
aluminium S11 |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +70°C |
| Storage temperature range |
-30°C ÷ +80°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10 g (from 10 up to 2.000 Hz) |
| Schock |
20 g (for 11 ms) |
ORDERING CODE
TKTC=XXXXXXXXXXXXXXXXXXnnXXXXnnn
STEPS
| 4 |
4 steps/turn G;B |
| 8 |
8 steps/turn G;B |
| 16 |
16 steps/turn G;B |
| 32 |
32 steps/turn G;B |
| 64 |
64 steps/turn G;B |
| 128 |
128 steps/turn G;B |
| 256 |
256 steps/turn G;B |
| 512 |
512 steps/turn G;B |
| 90 |
90 steps/turn G/0;B/0 |
| 180 |
180 steps/turn G/0;B/0 |
| 360 |
360 steps/turn G/0;B/0 |
| 90 |
90 steps/turn G/19;B/19 |
| 180 |
180 steps/turn G/38;B/38 |
| 360 |
360 steps/turn G/76;B/76 |
CODE
| B |
binary code natural |
| B/0 |
binary code centrally cutted. |
| B/19 |
binary code /exc (90) |
| B/38 |
binary code /exc (180) |
| B/76 |
binary code /exc (360) |
| G |
natural gray code |
| G/0 |
centrally cutted gray code |
| G/19 |
gray code/exc (90) |
| G/38 |
gray code/exc (180) |
| G/76 |
gray code/exc (360) |
VOLTAGE SUPPLY
| 5 |
+5V ±5% |
| 12 |
+12V ±5% |
| 11/30 |
+11V +30V |
PROTECTION CLASS
| K4 |
IP 64 (EN60529) |
| K6 |
IP 66 (EN60529) |
SOLID SHAFT
| A |
Ø 6mm (without milling) |
| B |
Ø 6mm (with milling 0,5x3mm) |
ELECTRICAL CONNECTIONS
| P |
on axial cable gland with cable from 1 up to 6m long |
| PL |
radial cable gland with cable 1 up to 6m long |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
OUTPUT CIRCUITS
| 20 |
PNP open collector (positive logic) |
| 21 |
PNP resistor included (positive logic) |
| 22 |
NPN open collector (negative logic) |
| 23 |
NPN resistor of pull-up (negative logic) |
OPTIONS
| NU |
Up/Down NPN |
| PU |
Up/Down PNP |
| LN |
Latch NPN |
| LP |
Latch PNP |
| E |
Parity Even (even) |
| O |
Parity Odd (odd) |
| Z |
Zero signal |
| ZN |
Inverted zero signal |
| ZV |
Displayed zero |
| I |
Zero signal |
| IN |
Inverted zero signal |
| IV |
Displayed index signal |
| S= |
Strobe custom |
| S200 |
Strobe 20 µs |
| S500 |
Strobe 50 µs |
| S101 |
Strobe 100 µs |
| S201 |
Strobe 200 µs |
| S501 |
Strobe 500 µs |
| S102 |
Strobe 1 ms |
| S202 |
Strobe 2 ms |
| S502 |
Strobe 5 ms |
| S103 |
Strobe 10 ms |
| S203 |
Strobe 20 ms |
| S503 |
Strobe 50 ms |
| S104 |
Strobe 100 ms |
| S204 |
Strobe 200 ms |
CUSTOM
