RSTX200

RSTX200 Datasheet

RSTX200

Electronic metric wheel of 200 mm for turn, length measurement (road, pipe, cable, bars etc).

Various wheel set-up according to applications.

Mechanical assembly completely assembled with encoder and the metric wheel support arm

Metric wheel (mm) 200
Metric wheel aluminum smooth, aluminum knurled, aluminum tired, plastic tired
Resolution (PPR) max 10.000
Interface LD,LD2,PP2,NPN,PNP

MECHANICAL SPECIFICATIONS
Dimensions see drawings
Shaft stainless steel
Shaft loading axial 200N; radial 200N
Shaft Rotation Speed 6000 RPM continuous
Bearings life 5 x 10^9  revolutions (minimum)
Weight <0,7Kg
ELECTRICAL SPECIFICATIONS
Output frequency up to 300 kHz
Sinchronous index output default on channel A; B – A+B on demand
Supply current without load 100 mA max
Protection short circuit protection (only LD2 e PP2) against inversion of polarity (except 5Vcc)
MATERIALS
Flange aluminium S11
Housing aluminium S11
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range -10°C ÷ +70°C
Storage temperature range -30°C ÷ +80°C
Relative humidity 98% RH without condensing
Vibrations 10 g (from 10 up to 2.000 Hz)
Schock 20 g (for 11 ms)



ORDERING CODE

RSTX200**=XXXXXXXXXXXXXXXXnnXXX-XXXXXnnn
TYPE

RSTX200M unidirectional
RSTX200MZ unidirect + index
RSTX200B bidirectional
RSTX200BZ bidirect + index

METRIC WHELL

= Standard (PUR wheel)


PULSE RATE

4 - 25 - 50 - 60 - 100 - 140 - 150 - 200 - 250 - 300 - 360 - 400 - 500 - 600 - 625 - 635
720 - 1000 - 1024 - 1200 - 1250 - 1440 - 1500 - 1600 - 1800 -2000 - 2048 - 2500
3600 - 4096 - 5000 - 9000 - 10.000 - 20.000
Other on demand

VOLTAGE SUPPLY

5 +5V ±5%
11/30 +11V ÷ 30V
5/28 +5V ÷ 28V
24/5 +11/30V +5V output

OUTPUT FREQUENCY

S from 0 up to 50kHz
V from 0 up to 150kHz

PROTECTION CLASS

K4 IP 64 (EN60529)
K5 IP 65 (EN60529)

SHAFT

10 Ø 10mm

ELECTRICAL CONNECTIONS

OUTPUT S; P; OC; OP; PP2; LD; LD2
PLnn radial cable gland with cable 1 up to 6m long
L07 on 7 pins radial MIL connector (TYPE A, B)
L10 on 10 pins radial MIL connector (TYPE A, B)
R1 on 12 pins radial “contact” connector (TYPE “D” CCW)

 

nn cable length (es. PL10 = 1m. ... PL60 = 6m)

OUTPUT CIRCUITS

S NPN standard (resistor included)
OC NPN open collector
P PNP (resistor included)
OP PNP open collector
PP2-5 Push-Pull 5 V output
PP2-1130 Push-Pull 11/30 V output (only with voltage supply 11/30 V)
PP2-528 Push-Pull 5/28 V output (only with voltage supply 5/28 V)
LD Line driver RS422 (26LS31) only 5V or 24/5V
LD2-5 Line driver 5 Vcc output
LD2-1130 Line driver 11÷30 Vcc output  (only with voltage supply 11/30 V)
LD2-528 Line driver 5÷28 Vcc output  (only with voltage supply 5/28 V)

CUSTOM