TDT40

TDT40 Datasheet

TDT410 – TDT411 – TDT420 – TDT421

Heavy duty encoder with integrated tachogenerator

Body diameter flangia square (mm) 63,5
Diameter shaft (mm) 9.52, 10
Resolution (PPR) max 2700
Output voltage 20V/1000RPM
Interface LD, LD2, PP2, NPN, PNP

MECHANICAL SPECIFICATIONS
Dimensions see drawings
Shaft stainless steel
Shaft loading axial 200N; radial 200N
Shaft Rotation Speed 4.000 RPM to short cycle time; 2000 RPM continuous whit hole shaft proof
Starting torque a 25° C 0,040 Nm; 0,070 Nm whit hole shaft proof
Moment of inertia 50g cm²
Bearings life 5 x 10^9  revolutions (minimum)
Weight ~ 0,45 kg
ELECTRICAL SPECIFICATIONS
Output frequency up to 100 kHz
Sinchronous index output default on channel A; B – A+B on demand
Supply current without load 150 mA max
Protection short circuit protection (only LD2 e PP2) against inversion of polarity (except 5Vcc)
MATERIALS
Flange aluminium anticorodal thermally stabilized
Housing aluminium passivated-painted with inhibithing treatment 180°C
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range -10°C ÷ +70°C
Storage temperature range -30°C ÷ +80°C
Relative humidity 98% RH without condensing
Vibrations 10 g (from 10 up to 2.000 Hz)
Schock 20 g (for 11 ms)



ORDERING CODE

TDTXXXFXXXXXXXXXXXXXX,XXXXnnXXX-XXXXXnnn
TYPE

TDT410 unidirectional
TDT411 unidirect + index
TDT420 bidirectional
TDT421 bidirect + index

ASSEMBLY

F Flange square


PULSE RATE

2 - 5 - 10 - 20 - 25 - 30 - 32 - 36 - 40 - 50 - 60 - 64 - 72 -
80 - 88 - 90 - 100 - 120 - 125 - 127 - 128 - 150 - 162 -
180 - 183 - 200 - 240 - 250 - 254 - 256 - 300 - 314 - 360 -
375 - 390 - 400 - 500 - 512 - 576 - 600 - 625 - 635 - 720 -
750 - 800 - 900 - 1000 - 1024 - 1200 - 1250 - 1270 -
1440 - 1500 - 1800 - 2000 - 2048 - 2500 - 2540 - 2700

VOLTAGE SUPPLY

5 +5V ±5%
11/30 +11V ÷ 30V
24/5 +11/30V +5V output

OUTPUT FREQUENCY

S from 0 up to 50 kHz
V from 0 up to 100 kHz

PROTECTION CLASS

K4 IP 64 (EN60529)
K5 IP 65 (EN60529)
K6 IP 66 (EN60529)

SOLID SHAFT

9,52  Ø 9,52mm
10  Ø 10mm

ELECTRICAL CONNECTIONS

OUTPUT S; P; OC; OP; PP2; LD; LD2 (except TDT421)
PLnn radial cable gland with cable 1 up to 6m long
L07 on 7 pins radial MIL connector
OUTPUT LD; LD2 (only TDT421)
PLnn radial cable gland with cable 1 up to 6m long
L10 on 10 pins radial MIL connector

 

nn cable length (es. PL10 = 1m. ... PL60 = 6m)

OUTPUT CIRCUITS

S NPN standard (resistor included)
OC NPN open collector
P PNP (resistor included)
OP PNP open collector
PP2-5 Push-Pull 5 V output
PP2-1130 Push-Pull 11/30 V output (only with voltage supply 11/30 V)
LD Line driver RS422 (26LS31) only 5V or 24/5V
LD2-5 Line driver 5 Vcc output
LD2-1130 Line driver 11÷30 Vcc output  (only with voltage supply 11/30 V)

CUSTOM