TK40

TK40 Datasheet

TK410 – TK411 – TK420 – TK421

Оптический инкрементальный энкодер — Сплошной вал.

Прочный энкодер для промышленного применения.

Диаметр корпуса (мм) 63.5
Фланец квадаратный 63.5 мм
Диаметр вала(мм) 6, 8, 9.52, 10
Разрешение(PPR) макс 20.000
Интерфейс LD, LD2, PP2, NPN, PNP

MECHANICAL SPECIFICATIONS
Dimensions see drawings
Shaft stainless steel
Shaft loading axial 200N; radial 200N
Shaft Rotation Speed 10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM whit hole shaft proof
Starting torque a 25° C 0,040Nm; 0,070Nm whit hole shaft proof
Moment of inertia 50g cm²
Bearings life 5 x 10^9  revolutions (minimum)
Weight ~ 0,45 kg
ELECTRICAL SPECIFICATIONS
Output frequency up to 100 kHz
Sinchronous index output default on channel A; B — A+B Optional
Supply current without load 150 mA max
Protection short circuit protection (only output LD2 and PP2) against inversion of polarity (except 5Vcc)
MATERIALS
Flange aluminium non corroding
Housing Polyamid 6 (PA6)
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range -10°C ÷ +70°C
Storage temperature range -30°C ÷ +80°C
Relative humidity 98% RH without condensing
Vibrations 10 g (from 10 up to 2.000 Hz)
Schock 20 g (for 11 ms)



Порядковые коды

TKXXXFXXXXXXXXXXXXXX,XXXXnnXXX-XXXXXnnn
TYPE

TK410 unidirectional
TK411 undirect.+ index
TK420 bidirectional
TK421 bidirez.+ index

ASSEMBLY

F Square Flange


PULSE RATE

2 - 5 - 10 - 20 - 25 - 30 - 32 - 36 - 40 - 50 - 60 - 64 - 72 -
80 -88 - 90 - 100 - 120 - 125 - 127 - 128 - 150 - 162 - 180
- 183 - 200 - 240 - 250 - 254 - 256 - 300 - 314 - 360 - 375
- 390 -400 - 500 - 512 - 576 - 600 - 625 - 635 - 720 - 750 -
800 - 900 - 1000 - 1024 - 1200 - 1250 - 1270 - 1440 -
1500 - 1800 - 2000 - 2048 - 2500 - 2540 - 2700 - 3600 - 4096 -
5000 - 9000 - 10.000 - 20.000

VOLTAGE SUPPLY

5 +5V ±5%
11/30 +11V ÷ 30V
24/5 +11/30V +5V output

OUTPUT FREQUENCY

S from 0 up to 50kHz
V from 0 up to 100kHz

PROTECTION CLASS

K4 IP 64 (EN60529)
K5 IP 65 (EN60529)
K6 IP 66 (EN60529)

SOLID SHAFT

6   Ø 6mm
8   Ø 8mm
9,52   Ø 9,52mm
10   Ø 10mm

ELECTRICAL CONNECTIONS

OUTPUT S; P; OC; OP; PP2; LD; LD2 (except TK421)
Pnn on axial cable gland with cable from 1 up to 6m long
PLnn radial cable gland with cable 1 up to 6m long
S07 on 7 pins axial MIL connector
L07 on 7 pins radial MIL connector
OUTPUT LD; LD2 (only TK421)
Pnn on axial cable gland with cable from 1 up to 6m long
PLnn radial cable gland with cable 1 up to 6m long
S07 on 7 pins axial MIL connector
L07 on 7 pins radial MIL connector

 

nn cable length (es. PL10 = 1m. ... PL60 = 6m)

OUTPUT CIRCUITS

S NPN standard (resistor included)
OC NPN open collector
P PNP (resistor included)
OP PNP open collector
PP2-5 Push-Pull 5 V output
PP2-1130 Push-Pull 11/30 V output (only with voltage supply 11/30 V)
LD Line driver RS422 (26LS31) only 5V or 24/5V
LD2-5 Line driver 5 Vcc output
LD2-1130 Line driver 11÷30 Vcc output  (only with voltage supply 11/30 V)

CUSTOM