TS58
TS580 – TS581
Optical incremental encoder – Solid shaft
TS58 – an economic incremental optical encoder suitable for different industrial applications.
Thanks to its versatility and reliability, this model allows to reduce costs of production, ensuring completely
controlled manufacturing process and significantly reducing downtime – a very important factor for
continuous production process.
Body diameter (mm) 58
Flange square flange, servo standard, servo-clip, FRE (REO444)
Diameter shaft (mm) 6, 8, 9.52, 10, 11, 11R
Resolution (PPR) up to 20.000, others on demand
Interface LD, LD2, PP2, NPN, PNP
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shaft |
stainless steel |
| Shaft loading |
axial 200N; radial 200N |
| Shaft Rotation Speed |
10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM whit hole shaft proof |
| Starting torque a 25° C |
0,025 Nm; 0,040 Nm whit hole shaft proof |
| Moment of inertia |
40g cm² |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Weight |
~ 0,3 kg |
ELECTRICAL SPECIFICATIONS
| Output frequency |
up to 300 kHz |
| Sinchronous index output |
default on channel A; B – A+B Optional |
| Supply current without load |
150 mA max |
| Protection |
short circuit protection (only output LD2 and PP2) against inversion of polarity (except 5V, 5/28V) |
MATERIALS
| Flange |
aluminium non corroding |
| Housing |
Polyamid 6 (PA6) |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +70°C |
| Storage temperature range |
-30°C ÷ +85°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10 g (from 10 up to 2.000 Hz) |
| Schock |
20 g (for 11 ms) |
ORDERING CODE
TSXXXXXXXXXXXXXXXXXXXX,XXXXnnXXX-XXXXXnnn
TYPE
| TS580 |
bidirectional |
| TS581 |
bidirect + index |
ASSEMBLY
| F1 |
Square Flange (TK40) |
| F2 |
Square Flange (TK45) |
| F3 |
Square Flange (TK50) |
| SG1 |
Servo-Clip (TK50) |
| SG2 |
Servo-Clip (TK45) |
| SG3 |
Servo-Clip |
| S1 |
Flange Servo |
| S2 |
Flange Servo (TK45) |
| FRE |
Flange REO(TK50) |
PULSE RATE
4 - 25 - 50 - 60 - 100 - 140 - 150 - 200 - 250 - 300 -
360 - 400 - 500 - 600 - 625 - 635 - 720 - 1000 -
1024 - 1200 - 1250 - 1440 - 1500 - 1600 - 1800 -
2000 - 2048 - 2500 - 3600 - 4096 - 5000 - 9000 -
10.000 - 20.000 ppr. Others on demand.
VOLTAGE SUPPLY
| 5 |
+5V ±5% |
| 5/28 |
+5 ÷ 28V |
| 11/30 |
+11V ÷ 30V |
OUTPUT FREQUENCY
| S |
from 0 up to 100KHz |
| V |
from 0 up to 300KHz |
PROTECTION CLASS
| K4 |
IP 64 (EN60529) (F1-F2-F3-SG1-SG2-SG3-S1-S2-FRE) |
| K5 |
IP 65 (EN60529) (F1-F3-SG1-S1-FRE) |
| K6 |
IP 66 (EN60529) (F1-F3-SG1-S1-FRE) |
SOLID SHAFT
| 6 |
Ø 6mm (Flange F1-F2-F3-SG1-SG2-SG3-S1-S2) |
| 8 |
Ø 8mm (Flange F1-F2-F3-SG1-SG2-S1-S2) |
| 9,52 |
Ø 9,52mm (Flange F1-F2-F3-SG1-SG2-S1-S2) |
| 10 |
Ø 10mm (Flange F1-F2-F3-SG1-SG2-S1-S2) |
| 11 |
Ø 11mm (Flange FRE-SG1) |
| 11R |
Ø 11mm (Flange FRE-SG1) |
ELECTRICAL CONNECTIONS
| OUTPUT |
S; P; OC; OP; PP2; LD; LD2 |
| PLnn |
radial cable gland with cable 1 up to 6m long |
| L07 |
on 7 pins radial MIL connector (TYPE "A", "B") |
| L10 |
on 10 pins radial MIL connector (TYPE "C") |
| R1 |
on 12 pins radial MIL connector (TYPE "D" - CCW) |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
| NOTE: L10 |
only for TS581 with LD, LD2 electronic output |
OUTPUT CIRCUITS
| S |
NPN standard (resistor included) |
| OC |
NPN open collector |
| P |
PNP (resistor included) |
| OP |
PNP open collector |
| PP2-5 |
Push-Pull only 5V |
| PP2-1130 |
Push-Pull 11/30Vcc output (only with voltage supply 11/30V) |
| PP2-528 |
Push-Pull 5/28Vcc output (only with voltage supply 5/28V) |
| LD |
Line driver RS422 (26LS31) only 5V |
| LD2-5 |
Line driver 5Vcc only 5V |
| LD2-1130 |
Line driver 11/30Vcc (only with voltage supply 11/30V) |
| LD2-528 |
Line driver 5/28Vcc (only with voltage supply 5/28V) |
CUSTOM
