TSW58

TSW580 – TSW581

Optical incremental encoder – blind shaft

Low cost incremental encoder for generic industrial application, with a standard size of 58 mm and a lot of connection interface is the best choice for the final user for the maximum free on the mechanical design (shaft diameter is user changeable by using our reducing bushing) and electrical interfacing (universal power supply from 5 to 30 V)

Body diameter (mm) 58
Mechanical assembly with antirotational spring
Blind shaft diameter(mm) 6,8,9.52,10,11,12,12.7,14,15 (reducing bushing except 15 mm)
Shaft depth (mm) max 18
Resolution (PPR) max 10.000, others on demand
Protection class (EN60529) up to K5
Interface LD2, PP2

MECHANICAL SPECIFICATIONS

Dimensions	see drawings
Shaft	stainless steel
Shaft loading	axial 40N; radial 60N
Shaft Rotation Speed	6000 RPM continuous
Starting torque a 25° C	0,025 Nm
Moment of inertia	40g cm²
Bearings life	5 x 10^9  revolutions (minimum)
Weight	~ 0,25 kg

ELECTRICAL SPECIFICATIONS

Output frequency	up to 300 kHz
Sinchronous index output	on channel A default; B or A+B Optional
Supply current without load	150 mA max
Protection	short circuit protection (only output LD2 and PP2) against inversion of polarity (except 5Vcc)

MATERIALS

Flange	aluminium S11
Housing	Polyamid 6 (PA6)

ENVIRONMENTAL SPECIFICATIONS

Operating temperature range	-10°C ÷ +70°C
Storage temperature range	-30°C ÷ +85°C
Relative humidity	98% RH without condensing
Vibrations	10 g (from 10 up to 2.000 Hz)
Schock	20 g (for 11 ms)

ORDERING CODE