TSW80P
TSW80P
Optical incremental encoder – Hollow through shaft
Hollow through shaft encoder for general industrial applications.
Particularly suitable applications of electric motors, the body and the plastic housing ensures a high immunity
to interference on the output signals.
Shaft diameters modifiable (or changeable) by the user through reducing bushes
Body diameter (mm) 80 (maximum length 28)
Mechanical assembly through antirotation pin (supplied with encoder)
Diameter hollow through shaft (mm) 8, 10, 12, 14, 15 (fixing with collar)
Resolution (PPR) 1024, 2048 (other resolution on demand)
Interface LD, LD2, PP2
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shafthollow through with collar clamp |
stainless steel |
| Shaft loading |
axial 5N; radial 5N |
| Shaft Rotation Speed |
3000 RPM continuous |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Weight |
~ 150 g |
ELECTRICAL SPECIFICATIONS
| Output frequency |
up to 200 kHz |
| Sinchronous index output |
A+B |
| Supply current without load |
100 mA max |
| Protection |
output channel protected short circuit protection, no protection against inversion of polarity only for Vcc = 5V |
MATERIALS
| Flange |
Polyamid 6 with glass fibre addiction |
| Housing |
Polyamid 6 with glass fibre addiction |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +85°C (L, Vcc = 8÷24), 105°C (H, only with Vcc = 5V) |
| Storage temperature range |
-30°C ÷ +110°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10 g (from 10 up to 2.000 Hz) |
| Schock |
20 g (for 11 ms) |
ORDERING CODE
TSW80P=XXXXXXXXXSK1XXPLnnXXX-XXXXnnn
TYPE
| TSW80P |
bidirectional + index (A&B) |
OPERATING TEMPERATURE
| L |
max. 85°C |
| H |
max. 105°C (only for 5V) |
VOLTAGE SUPPLY
| 5 |
+5V ±5% |
| 8/24 |
+8÷24V |
| 5/28 |
+5÷28V |
HOLLOW THROUGH SHAFT
| 8 |
Ø 8mm (H7) (bushing reduction) |
| 10 |
Ø 10mm (H7) (bushing reduction) |
| 12 |
Ø 12mm (H7) (bushing reduction) |
| 14 |
Ø 14mm (H7) (bushing reduction) |
| 15 |
Ø 15mm (H7) Clamp with collar |
ELECTRICAL CONNECTIONS
| OUTPUT |
PP2 |
| PLnn |
radial cable gland with cable 1 up to 6m long |
| OUTPUT |
LD, LD2 |
| PLnn |
radial cable gland with cable 1 up to 6m long |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
OUTPUT CIRCUITS
| PP2-5 |
Protected Push-Pull 5 V output |
| PP2-824 |
Protected Push-Pull 8÷24 V output |
| PP2-528 |
Protected Push-Pull 5÷28 V output |
| LD |
Line driver RS422 (26LS31) no protection |
| LD2-5 |
Protected Line driver 5 Vcc output |
| LD2-824 |
Protected Line driver 8÷24 Vcc output |
| LD2-528 |
Protected Line driver 5÷28 Vcc output |
CUSTOM
