TS52
TS520 – TS521
Optical incremental encoder – Solid shaft
Compact encoder for general industrial applications. Particularly suitable for lifts and elevators.
Body diameter (mm) 52
Flange square flange
Diameter shaft (mm) 9.52
Resolution (PPR) 500, 1000, 2000 (other values on demand)
Interface LD, LD2
MECHANICAL SPECIFICATIONS
| Dimensions | see drawings |
| Shaft | AISI stainless steel |
| Shaft loading | axial 40N; radial 40N |
| Shaft Rotation Speed | 10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM whith protection shaft |
| Starting torque a 25° C | 0,025Nm, 0,040 Nm with proof shaft |
| Moment of inertia | 40g cm² |
| Bearings life | 5 x 10^9 revolutions (minimum) |
| Weight | ~ 0,3 kg |
ELECTRICAL SPECIFICATIONS
| Output frequency | up to 300 kHz |
| Supply current without load | 70 mA max |
| Protection | short circuit protection, no limit duration, against inversion of polarity (except 5V, 5/28 V) |
MATERIALS
| Flange | aluminium non corroding |
| Housing | aluminium |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range | -10°C ÷ +70°C |
| Storage temperature range | -30°C ÷ +85°C |
| Relative humidity | 98% RH without condensing |
| Vibrations | 10 g (from 10 up to 2.000 Hz) |
| Schock | 20 g (for 11 ms) |
ORDERING CODE
TSXXXXXXXXXXXXXXXXXXX,XXXXnnXXX-XXXXXnnn
TYPE
| TS520 | bidirectional |
| TS521 | bidirez.+ index |
ASSEMBLY
| F | Square Flange |
PULSE RATE
500 – 1000 – 2000
others values on demand
VOLTAGE SUPPLY
| 5 | +5V ±5% |
| 5/28 | +5V ÷ 28V |
| 11/30 | +11V ÷ 30V |
OUTPUT FREQUENCY
| S | from 0 up to 100kHz |
| V | from 0 up to 300kHz |
PROTECTION CLASS
| K4 | IP 64 (EN60529) |
| K5 | IP 65 (EN60529) |
SOLID SHAFT
| 9,52 | Ø 9,52mm |
ELECTRICAL CONNECTIONS
| OUTPUT | LD; LD2 |
| L10 | on 10 pins radial MIL connector (type “C”) |
OUTPUT CIRCUITS
| LD | Line driver RS422 (26LS31) only 5V |
| LD2-5 | Line driver 5 Vcc output, only 5V |
| LD2-1130 | Line driver 11/30 Vcc output (only with voltage supply 11/30 V) |
| LD2-528 | Line driver 5/28 Vcc output (only with voltage supply 5/28 V) | LD2 output are short circuit protected |
CUSTOM