TTM58
TTM580 – TTM581 – TTM582
Magnetic incremental encoder – Solid shaft
Low-cost magnetic incremental encoder for generic industrial application.
With a standard size of 58 mm and a lot of connection interface is the best choice for the end user for the maximum free on the mechanical design and electrical interfacing (universal power supply from 5 to 30 V)
Body diameter (mm) 58
Diameter shaft (mm) 6, 8, 9.52, 10, 11, 12
Resolution (PPR) max 2048
Interface LD, LD2, PP2, NPN, PNP
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shaft |
stainless steel AISI 303 |
| Shaft loading |
axial 200N; radial 200N |
| Shaft Rotation Speed |
6000 RPM continuous |
| Starting torque a 25°C |
0,025Nm |
| Moment of inertia |
40g cm² |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Weight |
~ 0,25 kg |
ELECTRICAL SPECIFICATIONS
| Output frequency |
up to 200KHz |
| Sinchronous index output |
On channel A, A+B |
| No load supply current |
60mA max. |
| Protection |
short circuit protection (only output LD2 and PP2) against inversion of polarity |
MATERIALS
| Flange |
aluminium S11 |
| Housing |
Polyamid 6 (PA6) with integrated magnetic shield |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +70°C (Vcc = 5/28), 105° (only with 5V ed on demand) |
| Storage temperature range |
-30°C ÷ +105°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10g (da 10 a 2.000Hz) |
| Schock |
20g (per 11ms) |
ORDERING CODE
TTMXXXXXXXXXXXXXXSXXXX,XXXXnnXXX-XXXXXnnn
TYPE
| TTM580 |
bidirectional |
| TTM581 |
bidirect + index (sincr. on A) |
| TTM582 |
bidirect + index (sincr. on A+B) |
ASSEMBLY
| F1 |
Square Flange (TK40) |
| F2 |
Square Flange (TK45) |
| F3 |
Square Flange (TK50) |
| SG1 |
Servo-Clip (TK50) |
| SG2 |
Servo-Clip (TK45) |
| SG2 |
Servo-Clip |
| S1 |
Flange Servo |
| S2 |
Flange Servo (TK45) |
| FRE |
Flange REO (TK50) |
PULSE RATE
1- 2 - 4 - 8 - 10 - 16 - 20 - 25 - 32 - 40 - 50 - 64 - 80 -
100 - 125 - 128 - 200 - 250 - 256 - 400 - 500 - 512 -
1024 - 2048
PROTECTION CLASS
| K4 |
IP 64 (EN60529) |
| K5 |
IP 65 (EN60529) |
| K6 |
IP 66 (EN60529) |
SOLID SHAFT
| 6 |
Ø 6mm (Flange F1 - F2 - F3 - SG1 - SG2 - SG3 - S1 - S2) |
| 8 |
Ø 8mm (Flange F1 - F2 - F3 - SG1 - SG2 - S1 - S2) |
| 9,52 |
Ø 9,52mm (Flange F1 - F2 - F3 - SG1 - SG2 - S1 - S2) |
| 10 |
Ø 10mm (Flange F1 - F2 - F3 - SG1 - SG2 - S1 - S2) |
| 11 |
Ø 11mm (Flange FRE - SG1) |
| 11R |
Ø 11mm (Flange FRE - SG1) |
ELECTRICAL CONNECTIONS
| OUTPUT |
PP2; LD; LD2 |
| PLnn |
radial cable gland with cable 1 up to 6m long |
| L07 |
on 7 pins radial MIL connector (Tipo "A", "B") |
| L10 |
on 10 pins radial MIL connector (Tipo "C") |
| R1 |
on 12 pins radial "contact" connector (Tipo "D" - CCW) |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
Note: L10, R1: only version TTM581/TTM582 with electronic LD, LD2)
OUTPUT CIRCUITS
| PP2-5 |
Push-Pull 5 V output |
| PP2-528 |
Push-Pull 5/28 V output (only with voltage supply 5/28 V) |
| LD |
Line driver RS422 (26LS31) only 5V |
| LD2-5 |
Line driver 5 Vcc output only 5V |
| LD2-528 |
Line driver 5÷28 Vcc output (only with voltage supply 5/28 V) |
CUSTOM
