TSW80
TSW801 – TSW802 – TSW803 – TSW804
Optical incremental enconder – Hollow through shaft.
Hollow through shaft economic encoder (version with security dowels and clamping collar) for general industrial applications
Body diameter (mm) 80
Mechanical assembly through antirotation spring (available in different versions)
Diameter shaft (mm) from 20 up to 44
Resolution (PPR) 1024, 2000, 2500 (other resolution on demand)
Interface LD2, PP2
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shaft |
stainless steel |
| Shaft loading |
axial 60N; radial 60N |
| Shaft Rotation Speed |
2000 RPM continuous IP55; max. 1500 RPM per IP65 |
| Starting torque a 25° C |
< 12Nm |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Moment of inertia |
|
| Weight |
~ 0,6 kg |
ELECTRICAL SPECIFICATIONS
| Output frequency |
up to 100 kHz |
| Sinchronous index output |
default on channel A; A+B Optional |
| Supply current without load |
40 mA max |
| Protection |
short circuit protection (only output LD2 and PP2) non against inversion of polarity |
MATERIALS
| Flange |
aluminium S11 |
| Housing |
aluminium S11 |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +100°C |
| Storage temperature range |
-30°C ÷ +100°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10 g (from 10 up to 2.000 Hz) |
| Schock |
20 g (for 11 ms) |
ORDERING CODE
TSWXXXXXXXXXXXXXSXXXXPUnnXXX-XXXXXnnn
TYPE
| TSW801 |
unidirectional |
| TSW802 |
bidirectional |
| TSW803 |
unidirect + index |
| TSW804 |
bidirect + index |
ASSEMBLY
| M1 |
case side spring |
| M2 |
collar side spring |
PULSE RATE
1024 - 2000 - 2500
VOLTAGE SUPPLY
| 5 |
+5V ±5% |
| 5/30 |
+5V ÷ 30V (only for -10°C ÷ +85°C) |
PROTECTION CLASS
| K1 |
IP 55 (EN60529) |
| K5 |
IP 65 (EN60529) max 1500 RPM |
HOLLOW THROUGH SHAFT
| 3500 |
Ø 35mm H7 |
| 3800 |
Ø 38mm H7 |
| 4397 |
Ø 43,97mm H7 |
| 4440 |
Ø 44mm H7 |
ELECTRICAL CONNECTIONS
| OUTPUT |
PP2; LD; LD2 |
| PUnn |
cap radial cable gland with cable 1 up to 6m long |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
OUTPUT CIRCUITS
| PP2-5 |
Push-Pull 5 V output |
| PP2-530 |
Push-Pull 5/30 V output (only with voltage supply 5/30 V) |
| LD |
Line driver RS422 (26LS31) only 5V |
| LD2-5 |
Line driver 5 Vcc output |
| LD2-530 |
Line driver 5/30 V output (only with voltage supply 5/30 V) |
CUSTOM
