PROGRAMMABLE TISPW58 (from 1 up to 65536 ppr)

TISPW581

Programmable incremental optical hollow shaft encoder user-programmable from 1 up to 65536 PPR

New: available also with a cable output and aluminum housing.

Counting direction: can be set by user;
Zero pulse: the position can be defined by the user through a pushbutton on the encoder housing
Output voltage: selectable by user;
Encoder programming: by means of the classical RS232 serial port or simple USB to RS232 adapter (no need for custom expensive adapters);
Device diagnostics through signaling led on the encoder housing

Body diameter (mm) 58
Mechanical assembly with antirotational spring
Blind shaft diameter(mm) 6,8,9.52,10,11,12,12.7,14,15 (reducing bushing except 15 mm)
Resolution (PPR) max 65536
Interface LD2, PP2

NOTE: for programmable incremental encoders with a cable output we suggest to use the standard programming cable TISP581PRGCBL.20 with an auxiliary connector-to-cable adapter – the new code will be TISP581PRGCBL.20.XC24

MAIN ADVANTAGES:
Warehouse optimization - Ideal solution for different applications that require one single encoder model means one mechanical setup with different resolutions.
Lead times reduction - greater timeliness in maintenance services with a costs related reduction
Costs reduction for downtime – time to configure the encoder up to your needs, have a single model for different applications.
Easier procedure for setting the zero set for the equipment – zero pulse position can be set directly by the user.

IMPORTANT NOTE: It is strongly recommended to download and install our last software release, version 1.0.0.1
All the previous versions are no longer supported.

 

MECHANICAL SPECIFICATIONS

Dimensions	see drawings
Shaft	stainless steel
Shaft loading	axial 100N; radial 100N
Shaft Rotational Speed	10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM with protection shaft
Starting torque a 25° C	0,025 Nm; 0,040 Nm whit shaft proof
Moment of inertia	40g cm²
Bearings life	5 x 10^9 revolutions (minimum)
Weight	~ 0,3 kg

ELECTRICAL SPECIFICATIONS

Resolution	programmable from 1 to 65536 ppr
Output frequency	up to 300 kHz
Index pulse positioning	index position freely settable by user
Programmable counting direction	user selectable (CW or CCW)/
Power consumption	< 500 mW (without load)
Protection	short circuit and inversion of polarity protection

MATERIALS

Flange	aluminium non corroding
Housing	Polyamid 6 (PA6), metallic on request.

ENVIRONMENTAL SPECIFICATIONS

Operating temperature range	-25°C ÷ +85°C (100° C on demand)
Storage temperature range	-25°C ÷ +85°C
Relative humidity	98% RH without condensing
Vibrations	10 g (from 10 up to 2.000 Hz)
Schock	20 g (for 11 ms)

ORDERING CODE