TSW58HS
TSW580HS – TSW581HS
Optical incremental enconder – Hollow through shaft
Hollow shaft encoder for general industrial applications. Fixing system through antirotation pin or springs.
Shaft diameters modifiable (or changeable) by the user through reducing bushes
Body diameter (mm) 58
Mechanical assembly through slot antirotation or springs (available in different versions)
Diameter hollow through shaft (mm) 6, 8, 9.52, 10, 11, 12, 12.7, 14, 15 (depth 18)
Resolution (PPR) max 10.000
Interface LD2, PP2
MECHANICAL SPECIFICATIONS
| Dimensions |
see drawings |
| Shaft |
stainless steel |
| Shaft loading |
axial 40N; radial 60N |
| Shaft Rotation Speed |
6000 RPM continuous |
| Starting torque a 25° C |
0,025Nm |
| Bearings life |
5 x 10^9 revolutions (minimum) |
| Moment of inertia |
40g cm² |
| Weight |
~ 0,25 kg |
ELECTRICAL SPECIFICATIONS
| Output frequency |
up to 300 kHz |
| Sinchronous index output |
default on channel A; A+B Optional |
| Supply current without load |
150 mA max |
| Protection |
short circuit protection (only output LD2 and PP2) against inversion of polarity (except 5V, 5/28V) |
MATERIALS
| Flange |
aluminium non corroding |
| Housing |
Polyamid 6 (PA6) |
ENVIRONMENTAL SPECIFICATIONS
| Operating temperature range |
-10°C ÷ +70°C |
| Storage temperature range |
-30°C ÷ +85°C |
| Relative humidity |
98% RH without condensing |
| Vibrations |
10 g (from 10 up to 2.000 Hz) |
| Schock |
20 g (for 11 ms) |
ORDERING CODE
TSWXXXXXXXXXXXXXXXXXK4XXXXXXnnXXX-XXXXXnnn
TYPE
| TSW580HS |
bidirectional |
| TSW581HS |
bidirez.+ index |
ASSEMBLY
| M0 |
Without spring |
| M1 |
With M1 spring |
| M2 |
With M2 spring |
PULSE RATE
4 - 25 - 50 - 60 - 100 - 140 - 150 - 200 - 250 -
300 - 360 - 400 - 500 - 600 - 625 - 635 - 720 -
1000 - 1024 - 1200 - 1250 - 1440 - 1500 - 1600 -
1800 - 2000 - 2048 - 2500 - 3600 - 4096 - 5000 - 9000 - 10000
VOLTAGE SUPPLY
| 5 |
+5V ±5% |
| 5/28 |
+5 ÷ 28V |
| 11/30 |
+11V ÷ 30V |
OUTPUT FREQUENCY
| S |
from 0 up to 100kHz |
| V |
from 0 up to 300kHz |
HOLLOW THROUGH SHAFT
| B060 |
Ø 6mm |
| B080 |
Ø 8mm |
| B952 |
Ø 9,52mm |
| B100 |
Ø 10mm |
| B110 |
Ø 11mm |
| B120 |
Ø 12mm |
| B127 |
Ø 12,7mm |
| B140 |
Ø 14mm |
| 15 |
Ø 15mm |
ELECTRICAL CONNECTIONS
| OUTPUT |
S; P; OC; OP; PP2; LD; LD2 |
| PLnn |
radial cable gland with cable 1 up to 6m long |
| L07 |
on 7 pins radial MIL connector |
| L10 |
on 10 pins radial MIL connector |
| R1 |
on 12 pins radial MIL connector |
| nn |
cable length (es. PL10 = 1m. ... PL60 = 6m) |
| Note: |
L10 only version TSW581 with electronic LD, LD2 |
OUTPUT CIRCUITS
| S |
NPN standard (resistor included) |
| OC |
NPN open collector |
| P |
PNP (resistor included) |
| OP |
PNP open collector |
| PP2-5 |
Push-Pull 5 V output |
| PP2-1130 |
Push-Pull 11/30 V output (only with voltage supply 11/30 V) |
| PP2-528 |
Push-Pull 5/28 V output (only with voltage supply 5/28 V) |
| LD |
Line driver RS422 (26LS31) only 5V or 24/5V |
| LD2-5 |
Line driver 5 Vcc output |
| LD2-1130 |
Line driver 11÷30 Vcc output (only with voltage supply 11/30 V) |
| LD2-528 |
Line driver 5÷28 Vcc output (only with voltage supply 5/28 V) |
CUSTOM
