Encoder Incrementale
TS58HS
Ø58 mm
Heavy-duty incremental encoder with Ø58 mm hollow shaft for electric motors. Up to 5,000 PPR.
Ø58 mmIP656.000 RPM
Technical Specifications
| Parameter | Value |
|---|---|
| Resolution | Up to 5.000 PPR |
| Power Supply | 5V; 11÷30V |
| Outputs | S, OC, P, OP, PP2, LD, LD2 |
| Shaft Load | axial 25N; radial 25N |
| Max Speed | 6.000 RPM |
| Protection Rating | IP65 |
| Operating Temperature | -10°C … +70°C |
| Connection | radial cable / connector |
| Dimensions | see drawings |
| Shaft / Bore | stainless steel |
| Max Torque | 0,025 Nm; 0,040 Nm with shaft protection |
| Weight | ~ 0,2 kg |
| Mounting | axial 25N; radial 25N |
| Inertia | 40 g·cm² |
| Bearing Life | 5 × 10⁹ rev (min) |
| Flange Material | corrosion-resistant aluminium |
| Housing Material | corrosion-resistant aluminium |
| Shaft Material | stainless steel |
| Operating Temperature | -25°C ÷ +100°C (5V only e ≥1024 PPR); -10°C ÷ +70°C (< 1024 PPR) |
| Storage | -30°C ÷ +110°C |
| Humidity | 98% RH without condensation |
| Vibrations | 10 g (10 ÷ 2.000 Hz) |
Order Code Configurator
Order code
TS58HS1Type
2Assembly
3Pulse Rate (PPR)
4Voltage Supply
5Output Frequency
6Protection Class
7Through Shaft
8Electrical Connection
9Output Circuit
10Custom / Special
Code